Description
Cisco SG220-26 Network Switch Kenya
The Cisco SG220-26 Kenya Switch delivers outstanding value, providing comprehensive features designed for growing businesses while maintaining the affordability of smart switches. This switch is part of the Cisco small and midsize business portfolio and is an affordable smart switch equipped with security, performance, and ease of use to help build a solid business network. The Cisco SG220-26 Kenya Switch is a 24-port Gigabit and 2-port Gigabit RJ45/SFP combo with capabilities such as security and quality of service (QoS), and access control lists (ACLs). Setup and configuration is simplified with intuitive, browser-based tools. Add secure and energy-saving switching capacity to a small mid-size corporate network with the Cisco SG220-26 Kenya Smart Switch from Cisco. The Cisco SG220-26 Kenya Smart Switch comes equipped with 24 Gigabit RJ45 ports, two Gigabit combo RJ45/SFP uplink ports, a total switching capacity of 52 Gb/s and a total forwarding capacity of 38.69 Mpps. Boasting 128MB of processor RAM, the Cisco SG220-26 Kenya comes with security features such as 802.11x authentication, guest VLANs, access control lists, and denial of service protection, while support for Energy-Efficient Ethernet helps to conserve power during low-activity periods.
Features
Flexible Management
Management options for the Cisco SG220-26 Kenya Smart Switch include Simple Network Management Protocol (SNMP), a Command-Line Interface (CLI), a web-based interface, and the Cisco FindIT utility.
Configuration and Deployment Features
Cisco Discovery Protocol (CDP) and Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED) automatically detects the devices connected to your network, then automatically configures the switch with the appropriate settings and instructs end devices on the appropriate voice VLAN or QoS parameters to use. In addition, the Cisco FindIT Network Discovery Utility discovers Cisco devices on the network and display basic information, such as serial numbers and IP addresses.
Remote Management
Cisco SG220-26 Kenya use SNMP (Simple Network Management Protocol), you can set up and manage all switches and other Cisco devices in your network remotely.
Dual Image Support
With the ability to maintain two images in permanent storage instead of only a single image, you can perform software upgrades without taking the network offline or worrying about an outage because of a bad image file.
Dual Configuration Files Support
Configures the device, validating the configuration, and then save the configuration to take effect after reboot. Additionally, a mirror configuration file provides automatic backup of the latest stable configuration file.
IPv6 Support
The Cisco SG220-26 Kenya provides native support for IPv6, making it easier to migrate to the next generation of networking applications and operating systems without an equipment upgrade.
Network Security
Cisco SG220-26 Kenya has support for network security applications such as IEEE 802.1X and port security can tightly limit access to specific segments of your network. Guest virtual LANs (VLANs) let you provide internet connectivity to nonemployee users while isolating critical business services from guest traffic. Extensive ACLs can restrict sensitive portions of the network from unauthorized users and guard against network attacks. Security mechanisms such as broadcast/multicast/unknown unicast storm control and Bridge Protocol Data Unit (BPDU) guard can protect the network from invalid configurations or malicious intent. Denial of service (DOS) attack prevention helps to increase uptime in the event of a network attack. Finally, RADIUS, TACACS+, local database authentication, and secure management communication over SSL, SSH, and SNMPv3 can help protect management sessions.
IP Telephony Support
Cisco SG220-26 Kenya is embedded QoS intelligence prioritizes delay-sensitive services such as voice and video and simplifies unified communications deployments, helping to ensure consistent network performance for all services. For example, automated voice VLAN capabilities let you plug any IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone. The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice traffic.
Energy Efficiency
Energy Efficient Ethernet (IEEE 802.3az) and Energy Detect support help you save operational expenses and reduce your environmental footprint.
Layer 2 Switching Features
MAC Table Support for up to 8,192 MAC addresses.
Spanning Tree Protocol (STP)
Standard 802.1d Spanning Tree support, enabled by default Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]) Multiple Spanning Tree instances using 802.1s (MSTP) 16 instances are supported
Port Grouping
Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Cisco SG220-26 Kenya has up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
Load balance based on source and destination MAC address, or source and destination MAC/IP
Specifications
Interfaces | |
Ports |
|
Protocols | |
Layer Services Supported | Layer 2 Support |
Supported Protocols |
|
Queuing | Strict Priority, Weighted Round Robin (WRR) |
Transmission Method | Store-and-Forward |
Jumbo Frames Support | 9216 Bytes |
Security | |
Security Features |
|
SNMP Support | 1, 2c, 3 |
Standards | |
RFC |
|
Supported IEEE Standards | 802.1d, 802.1q/p, 802.1s, 802.1w, 802.1x, 802.3, 802.3ab, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3u, 802.3x, 802.3z |
Performance | |
Forwarding Rate | 38.69 Mpps |
Switching Bandwidth | 52 Gb/s |
Packet Buffer | 4.1 MB |
Computer | |
Flash Memory | 32 MB |
Memory | 128 MB |
Electrical | |
Power Draw | 18.9 W |
AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
Environmental | |
Operating Temperature | 32 to 122°F / 0 to 50°C |
Operating Humidity | 10 to 90% |
Storage Temperature | -4 to 158°F / -20 to 70°C |
Storage Humidity | 10 to 90% |
Certifications | C-Tick, CE, CSA, FCC, UL, as per Manufacturer |
General | |
Cooling System | Passive |
Indicator Lights | Link/Activity, Speed, System |
Dimensions | 17.32 x 7.91 x 1.73″ / 440 x 201 x 44Â mm |
Weight | 6.19Â lb / 2.81Â kg |
Packaging Info | |
Package Weight | 8.8 lb |
Box Dimensions (LxWxH) | 21 x 12.5 x 4.1″ |